14
SUBV10 & 12 Manual
If space allows, try experimenting with boundary loading your subwoofer: It can
significantly increase bass impact, lower cone excursion, and power demands.
Placing it near a wall increases bass output; placing it in a corner maximizes
output; placing it too far from room boundaries will sound uneven and lacking
in impact. Once you have found a good, general location, try fine-tuning the sub’s
placement by moving it in small increments, using program material containing
even and consistent bass. Moving the sub a few feet in any direction can make a
profound dierence; listen for the position that provides the best combination of
deep bass impact, clarity, and evenness.
Proximity Placement to a Wall or Corner
Take care not to scratch the fine finish of your subwoofer. Do not place hard irreg-
ularly shaped objects on or abutting your subwoofer. Clean with a so cloth and
a furniture cleaner or rubbing alcohol.
Cleaning & Care
To Next Page
Loading...