5
SUBV10 & 12 Manual
Before You Begin
• Verify the power switch is in the OFF position before making any connections;
when making connections, make them securely. Failure to do so may result
in noise, poor performance, or damage to connected equipment.
• Bundling power cords with subwoofer or speaker cables may produce
unwanted hum in your system. If these cords must be in contact with each
other, cross them at 90 degree angles to minimize any potentially adverse
eects.
• Do not touch or tap on the aluminum cone while the subwoofer is operating.
This can permanently mar, damage or dent the cone.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Important Safety Instructions
To Next Page
Loading...
Need help?
General