Why my Orima ORM108 Washer machine does not start?
Your Orima Washer might not start due to several reasons. Ensure the machine is properly plugged in and that the fuses are not faulty, replacing them if necessary. Verify there is mains power and that you've pressed the Start/Pause button. Also, make sure the program dial isn't in the 'stop' position and that the machine door is completely closed.
What to do if my Orima ORM108 Washer machine does not intake water?
If your Orima Washer isn't taking in water, start by checking if the water tap is turned on. Inspect the water inlet hose for any twists and untwist it if necessary. Also, the water inlet hose or inlet filter might be clogged, so clean them. Ensure that the machine door is completely closed.
Why does my Orima Washer machine vibrate so much?
If your Orima Washer is vibrating, it could be due to several factors. Check if the feet have been adjusted properly to stabilize the machine. Ensure that the transit bolts, which are fitted for transportation, have been removed. Avoid setting up your washing machine on a hard surface. Also, avoid overloading the drum and ensure laundry is spread evenly. Note that a small load might also cause vibrations, but it won't prevent the machine from operating.
What to do if my Orima Washer machine does not discharge water?
If your Orima Washer isn't discharging water, check the drain hose for any clogs or twists, and clean or untwist it as needed. Also, the pump filter might be clogged, so clean it. Ensure that your laundry is spread evenly in the machine to prevent it from being too tightly packed.
How to fix excessive foam in Orima ORM108 Washer detergent drawer?
If you notice excessive foam in the detergent drawer of your Orima Washer, it's likely due to using too much or the wrong type of detergent. To stop the foam, press the Start/Pause button, then dilute one tablespoon of softener into 1/2 liter of water and pour it into the detergent drawer. Press the Start/Pause button again after 5-10 minutes. Ensure you only use detergents specifically produced for automatic washing machines in the future.
Why is the washing result unsatisfactory in my Orima Washer?
An unsatisfactory washing result from your Orima Washer could stem from a few issues. Your washing might be too dirty for the selected program; refer to the program tables to choose a more suitable one. You might not be using enough detergent, so follow the instructions on the detergent packaging. Also, there might be too much laundry in the machine, so ensure you're not exceeding the maximum capacity for the selected program. If you have hard water, increase the amount of detergent following the manufacturer’s instructions. Ensure that your laundry is spread out.
Why does my Orima ORM108 Washer discharge water as soon as it is loaded?
If your Orima Washer discharges water as soon as it's loaded, the end of the water drain hose might be too low. Check that the drain hose is at a suitable height.
Why does laundry have detergent residue after washing in Orima Washer?
If your laundry has detergent residue after washing in your Orima Washer, it may be due to non-dissolving particles in some detergents appearing as white spots. Perform an extra rinse or clean your laundry with a brush after it dries.
Why do grey spots appear on laundry after washing in Orima Washer?
If grey spots appear on your laundry after washing in your Orima Washer, it's likely due to untreated oil, cream, or ointment on the items. Use the amount of detergent as instructed on the packaging in the next wash.
Why does the spin cycle in my Orima Washer not start?
If the spin cycle in your Orima Washer doesn't start or starts later than expected, it's likely because the Unbalanced load control system has been activated. This system will attempt to spread your laundry, and the spin cycle will begin once the load is balanced. For future washes, load the drum evenly.
Essential safety guidelines for appliance use.
Safe operation and usage practices for the washing machine.
Handling packaging materials and environmental considerations.
Tips for efficient energy and water consumption.
Detailed technical data and operating parameters of the washing machine.
Step-by-step guide to remove transit bolts before operation.
Instructions for leveling the washing machine using its feet.
Guidelines for safely connecting the washing machine to the power supply.
Proper procedure for connecting the water inlet hose.
Correct method for connecting the water drain hose.
Explanation of the detergent drawer compartments and usage.
Details on detergent compartments for different wash types.
How to use the program selection dial to choose wash cycles.
Understanding the washing machine's electronic display and indicators.
Steps for preparing clothes before washing, including sorting and care labels.
How to load laundry correctly into the drum for optimal washing.
Guidance on the type and amount of detergent to use for different washes.
Basic steps to start and operate the washing machine.
How to choose the most suitable wash program for your laundry.
Explanation of the automatic half-load function for efficiency.
Overview of extra features like temperature and spin speed adjustments.
How to activate and deactivate the child lock feature for safety.
Steps to cancel a running wash cycle.
What happens when a wash program finishes and post-wash actions.
Key notes and explanations related to the wash programme table.
Important safety precautions before performing cleaning or maintenance.
Instructions for cleaning the water inlet filters to ensure proper water supply.
Guide on how to clean the pump filter to maintain pump performance.
How to remove and clean the detergent drawer to prevent buildup.
Cleaning instructions for the external casing of the washing machine.
How to clean the washing machine drum, including rust stain removal.
To Next Page
General