Orima ORM108 - CLEANING AND MAINTENANCE; Warning; Water Inlet Filters

EN - 22
7. CLEANING AND
MAINTENANCE
7.1 Warning
Turnyourmainspower
supply off and remove the
plug from the socket
beforecarryingout
maintenanceandcleaning
ofyourmachine.
Turn off the water
supplybeforestarting
maintenanceandcleaning
ofyourmachine.
CAUTION: Do not
usesolvents,abrasive
cleaners, glass cleaners
orall-purposecleaning
agents to clean your
WashingMachine.They
maydamagetheplastic
surfaces and other
componentswiththe
chemicalstheycontain.
7.2 Water Inlet Filters
Waterinletfilterspreventdirtandforeign
materialsfromenteringyourmachine.We
recommendthatthesefiltersarecleaned
whenyourmachineisunabletoreceive
sufficientwater,althoughyourwatersupply
isonandthetapisopen.Werecommend
thatyoucleanyourwaterinletfiltersevery
2 months.
• Unscrewthewaterinlethose(s)from
theWashingMachine.
• Toremovethewaterinletfilterfromthe
waterinletvalve,useapairoflong-
nosedplierstogentlypullontheplastic
barinthefilter.
• Asecondwaterinletfilterislocatedin
thetapendofthewaterinlethose.To
removethesecondwaterinletfilter,use
apairoflong-nosedplierstogentlypull
ontheplasticbarinthefilter.
• Cleanthefilterthoroughlywithasoft
brushandwashwithsoapywaterand
rinsethoroughly.Re-insertthefilterby
gentlypushingitbackintoplace.
CAUTION: Thefiltersatthe
waterinletvalvemaybecomeclogged
duetowaterqualityorlackofrequired
maintenanceandmaybreakdown.
Thismaycauseawaterleak.Anysuch
breakdowns are out of the scope of the
warranty.