P-S
P
P1..............8
P2..............8
Parallel Fan Powered Box With Reheat..............19
Parallel Flow Fan Terminals..............21, 23, 24
Polling..............26
Power/Comm Board
Connection Diagram..............14
Sizing..............9
Wiring..............9, 14
Power/Comm Modular Connectors..............8
Powering Up..............17
Power Wiring..............17
Pressure Dependent VAV/Zone
Controller Actuator Package
Components..............6
Dimensions..............4
Pressure Independent Boxes..............19
Pressure Independent VAV/Zone
Controller Actuator Package
Components..............6
Dimensions..............5
Prism..............26
Prism software..............18
Programming
Controller..............18
Proportional Heat..............22, 24
Proportional Heating Signal..............19
Proportional Hot Water Valve..............19
Push-Button Override Group ID#..............19
Push-Button Override Operation..............20
PWR LED..............28
R
REC LED..............28
Rectangular Zone Damper Kit
Mounting..............9
Reheat Minimum..............21
Reheat Relay Staging..............22
Relay Output #1..............8
Relay Output #2..............8
Relay Output #3..............8
Relays
3 Stage Heating Applications..............8
Analog Output..............8
Auxiliary Heat..............8
Fan Enable..............8
Heating Stage 1..............8
Heating Stage 2..............8
Relay Sequencing..............8
Relay Staging..............22
Resistance Testing
Digital Room Sensor..............31
Modular Room Sensor..............31
Reverse Acting..............19
Round Zone Damper Kit
Mounting..............9
S
Scheduling..............20
SCR Electric Heat
Wiring..............13
Sensors
Temperature Sensor Testing..............30
Sequences
Occupied Mode..............21, 22
Unoccupied Mode..............23, 24
Series Fan Powered Box With Reheat..............19
Series Flow Fan Terminals..............21, 23, 24
Setup
VAV/Zone..............19
Slaved Zone
Connection Diagram..............16
Wiring..............16
Slaved Zone Damper
Wiring..............16
Slave Wiring Adapters..............16
Space Cooling Mode..............20, 21, 23
Space Heating Mode..............20, 22, 23
Space Temperature..............8
Space Temperature Sensor
Diagnostics..............29
Space Vent Mode..............20, 21, 23
Staged Electric Heat
Wiring..............11
Stand Alone System
Addressing..............17
STAT LED..............28
Steps of Reheat..............19
Supply Air Cooling Mode..............20
Supply Air Heating Mode..............20
Supply Air Temperature Sensor..............8, 9
Diagnostics..............29
Supply Air Vent Mode..............20
System Manager TS..............18, 26
Zone
Zone
Index
34
Non-Modular ZCAP Technical Guide