17
Chapter 3: Seals
ere are various seals in and on the LZR machines. ese seals must not be, for any reason, broken
or removed without authorization from Sunstone Engineering.
NOTE
Removing or breaking certain seals on this machine can have immediate and
negative effects on the weld system.
ATTENTION
e manufacturer denies all responsibility for the nonconformance use of this
machine.
It is prohibited to start the equipment before the machine is declared in confor-
mance with the actual directives.
NOTE
Opening the laser and accessing the internal parts of the equipment is allowed
only to authorized personnel who are qualified, trained, and aware of the potential
electric risks.
Sunstone Engineering denies all responsibility for any interventions on behalf of
untrained personnel.
NOTE
Access to the internal parts of the laser resonator is allowed only to authorized
personnel who are qualified, trained, and aware of the optical risks.
Sunstone Engineering denies all responsibility for any interventions on behalf of
untrained personnel.
3.1: SAFETY LABELS
e labels and the stickers are applied on the equipment in conformance with the FDA and European
safety rules. ey must not be removed or damaged. For possible changes you can contact Sunstone
Engineering.
To Next Page
Loading...
Need help?
General
