Orion 32” - 7. REMOTE CONTROL; Remote Control Operation (TV Mode)

7. REMOTE CONTROL
8
1.
Turn the LED TV ON or OFF.
2.MUTE
Press to mute the sound. Press again or press VOL+ to
un-mute the TV.
3.
P.MODE
Press to select the picture modes.
5.S.MODE
Press this button to change the audio mode.
6.DISPLAY
Press to display the source and channel's information.
7.NICAM
Press to select the NICAM modes.
7.AUDIO
Audio select button.
8.NUMBER BUTTONS
The numerical keys are used for selecting the number of
the channel.
9.
Return to the previous channel viewed.
10.-/--
Press this button to enter Channel List.
11.TV MENU
Press to enter or exit the setup menu.
12.EXIT
Press to exit all the OSD on the screen.
13.MEDIA
Press to enter USB menu.
14.SOURCE
Press SOURCE to display the OSD input source, Press ▲▼
to select an input source, and then press ENTER to confirm.
15.THUMBSTICK( ▲/ ▼/◄ / ►/ ENTER)
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
16.CH+/CH-
Press to scan through channels.
17.VOL+/VOL-
Press to increase/decrease the sound level.
POWER
AUTO
Press to do auto configuration directly(In VGA mode).
4.
MEDIA
4
5
1
2 3
6
7
8
910
1211 13 14
15
16
17
Remote Control Instructions in TV mode