Orion 32+ User Manual

Orion32+ | Gen 3
Premium 64-channel Thunderbolt(TM)/USB AD/DA Converter
User Manual
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
Do not remove the screws, cover, or cabinet. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Do not expose this device to rain, moisture or spillover of liquid of any kind.
Should any form of liquid or a foreign object enter the device, do not use it. Switch off
the device and then unplug it from the power source. Do not operate the device again
until the foreign object is removed or the liquid has completely dried and its residues fully
cleaned up. If in doubt, please consult the manufacturer.
Do not handle the power cables with wet hands!
Make sure the device is switched off when plugging/unplugging it to/from the power
source.
Avoid placing things on the cabinet or using the device in a narrow and poorly
ventilated place, which could affect its operation or the operation of other closely located
components.
If anything goes wrong, turn off the device first and then unplug the power. Do not
attempt to repair the device yourself. Consult authorized service personnel or your dealer.
Do not install near any heat sources such as radiators, stoves, or other devices
(including amplifiers) that produce heat.
Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for
electronics equipment.
Connect all your devices before powering your unit.

Orion 32+ Specifications

General

Bit Depth	24-bit
Channels	32
Sample Rate	192kHz
Interface	USB, Thunderbolt
Power Supply	External
Connectors	DB-25

Summary

Safety Notes and Precautions

General Safety Precautions

Covers avoiding water, foreign objects, proper ventilation, and using correct cleaning agents.

Power Handling and Repair

Details safe power cable connection and prohibits user self-repair, directing to qualified personnel.

Getting Started and Front Panel Controls

Initial Setup Procedure

Step-by-step guide for connecting the device, installing software, and registering the product for initial use.

Power Button and System Menu

Describes the power button's function and how to access the system menu for configuration options.

Front Panel Controls Details

Display and Antelope Button Menu

Covers the multi-function display and accessing the Control Menu via the Antelope button for adjustments.

Rear Panel Connections Explained

Power and Clocking Connections

Digital Audio and MADI Connections

Thunderbolt and USB Connectivity

Additional Connectivity: USB, Monitor, Analog

Software Control Panel Overview

Main View Controls: Power, Meters, Clock Source

Routing Tab and Display Functions

Mixer Tab Functions

Mixer Channel Controls

Mixer Master and Configuration

AuraVerb and AFX Tab

AFX Tab Overview

Overview of the AFX (Antelope FPGA Effects) tab for applying DSP-powered effects.

Options Tab and User Tips

Options Tab Settings

Accessing the settings window for various device and software configurations.

General and Audio Settings

Channel and Connectivity Options

Troubleshooting Guide

Startup and Audio Signal Issues

Troubleshooting common problems related to device startup, audio routing, sample rates, and signal detection.