Mixer Tab
1. Fader Level indication
2. Fader (double-click to reset to zero)
3. Pan
4. Send
5. Mixer 1-4 Show/Hide
6. Mute
7. Solo
8. Stereo Link
9. Master Mix Fader
10. Mute Master
Orion32+ | Gen 3 comes with four software low latency mixers which provide near zero
latency mix and monitoring that can be distributed using the Control Panel. The new
Orion32+ | Gen 3 allows a low latency mix to be distributed to any output.
For example, you can drag all of the thirty-two USB play channels to Mixer 1 channels and
then drag and drop MIX 1 L/R to LINE OUT 1&2, providing a stereo bus mix to LINE OUT
channels 1 and 2.
The low latency mixers provide the basic functions of a real mixer such as: Solo, Mute,
Pan, Link channels, Volume Level controlled by faders and a Master Fader, so you can
easily make a stereo mix; plus an Auxiliary send in order to use the DSP effects.
Maximum Number of Channels per Sample Rate:
To Next Page
Loading...