In the event that your Orion speakers appear to require service,
we ask that you first do a little troubleshooting to determine if the
problem is actually the speaker or a problem located in a different
part of the vehicle such as the amplifier, wiring, fusing or possibly
the source unit.
If your Orion speakers have been installed professionally by an
Authorized Orion Dealer, we recommend that you return to the
Dealer and demonstrate the problem to a qualified installer or repair
technician. If you installed the speakers yourself, use the following
guidelines to help find the problem:
No Sound
Check the source unit or amplifier for power and be sure they are
operating properly.
Check all signal connections.
Check for any wiring that may be shorting together or touching the
metal chassis.
Check all ground connections.
Distorted Sound At All Volumes
Check for bad speaker connections.
Check wiring for correct polarity.
Distorted Sound At High Volumes Only
Check for loose mounting of the speaker.
Inspect the speaker for debris in the cone or other obstructions.
Poor High Frequency Response
Check wiring for correct polarity.
Check Treble controls or EQ settings.
Check the Tweeter for possible damage.
8
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
