Need help?Do you have a question about the Orion HCCA10004 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| RMS Power @ 1 Ohm | 4000W |
| THD at Rated Power | <1% |
| Input Sensitivity | 200mV - 6V |
| THD | <1% |
| Subsonic Filter | 10Hz - 50Hz |
| Phase Shift | 0-180 degrees |
| Bass Boost | 0-18dB |
Lists all items included in the amplifier package.
Warning about hearing damage from high sound pressure levels.
Prompts users to record important amplifier details for warranty.
Diagram and labels for the end panel of the HCCA10002 amplifier.
Diagram and labels for the end panel of the HCCA10004 amplifier.
Details on connecting power wires (+BAT, GND, REM) to the amplifier.
Diagram and labels for the top panel controls of the amplifier.
Step-by-step instructions on how to remove the amplifier's top cover.
Detailed technical specifications for the HCCA10002 model.
Detailed technical specifications for the HCCA10004 model.
Explains signal input/output configurations and gain adjustments.
Details on adjusting the input sensitivity and gain range for the amplifier.
Guide on how to use the Intelli-Q feature for subwoofer performance.
Recommended Intelli-Q boost levels for different subwoofer enclosure types.
Explains how to use line outputs for system expansion.
Overview of the variable crossover options available.
Describes the function of the crossover selection switch.
Details on adjusting the low-pass crossover frequency.
Explains how to adjust the high-pass crossover frequency.
Information on using the optional remote gain control.
Example graphs showing high-pass filter effects on woofer performance.
Example graphs demonstrating high-pass filter use in sealed enclosures.
Example graphs illustrating high-pass filter use in a vented enclosure.
Detailed instructions for making power connections to the amplifier.
Wiring configurations for stereo operation of the HCCA10002.
Wiring configurations for bridging the HCCA10002 amplifier.
Wiring for a three-channel setup using the HCCA10002.
Wiring configurations for four-channel stereo operation of the HCCA10004.
Wiring configurations for three-channel operation of the HCCA10004.
Wiring configurations for five-channel operation of the HCCA10004.
Wiring configurations for tri-mode six-channel operation of the HCCA10004.
Guidance on selecting appropriate locations for mounting the amplifier.
Specific advice for mounting the amplifier in different vehicle compartments.
Important safety and installation advice to follow.
Lists necessary tools for amplifier installation.
Sequential steps for installing the amplifier, from wiring to final checks.
Steps to verify the amplifier installation and operation after setup.
Guide on setting amplifier controls for optimal audio performance.
Explains the meaning of amplifier indicator lights (LEDs) for troubleshooting.
Common causes and solutions for the amplifier having no output.
Reasons and fixes for the amplifier intermittently turning on and off.
Explains causes and solutions for audio distortion from the amplifier.
Issues related to incorrect speaker connection and how to resolve them.
Causes and solutions for poor bass performance from the amplifier.
Explains why the battery fuse might blow and how to fix it.
Lists programmable ESP®-2 features and their default settings.
Explains the different LED states and their meanings for troubleshooting.
Details on input gain range and adjustment lock features.
Describes how the amplifier logs recent events for diagnostics.
Details the terms and conditions of the amplifier's warranty.
To Next Page
