Orion vortex R10 User Manual

Step A
Connect Battery to ESC
Hold SET key 3s to save the
selected option into ESC
Red LED blinks once means the
1
st
option of 1
st
item
Hold SET
key for 3s
Release SET key to enter
Program Mode
Enter the 1
st
item
Green LED blinks once
Hold SET key for 1s
Then Green LED blinks
Switch on the ESC
Enter the 2
nd
item
Green LED blinks twice
Enter the M
th
item
Green LED blinks M times
Hold SET key for 5s to reset
all programmable items
Choose Programmable Item
Choose the wanted option of 2
nd
item by clicking SET key
Red LED blinks N times means
the N
th
option of 1
st
item
Red LED blinks twice means
the 2
nd
option of 1
st
item
Click SET key
Click SET key
Click SET key
Click SET key
Click SET key
Choose the wanted option of M
th
item by clicking SET key
Turn off ESC to quit Program
Mode or set other item from
STEP A
Hold SET
key for 3s
Hold SET
key for 3s
Choose The Wanted Option
…
…
How to program the ESC with the Setup key
www.teamorion.com

Orion vortex R10 Specifications

General

Brand	Orion
Model	vortex R10
Category	Controller
Language	English