Orion Vortex R10 pro User Manual

INSTRUCTION MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG

Orion Vortex R10 pro Specifications

General

Resolution	1080p Full HD
Motion Detection	Yes
Power Source	AC Adapter
Connectivity	2.4GHz Wi-Fi
Storage	MicroSD card up to 128GB, cloud storage
Two-Way Audio	Yes
Mobile App	Orion Security App (iOS and Android)

Summary

Warnings

Connections

Sensorless Brushless Motors

Sensor Brushless Motors

ESC Calibration

Calibration Procedure

Step-by-step guide to calibrate ESC to transmitter inputs.

Programming Your ESC

Enter Programming Mode

Reset to Factory Default Settings

Available Parameters and Default Settings

ESC Parameters Setup

Standard Parameter Setup Using Setup Button

Guide to adjusting standard parameters via the ESC's button.

Advanced Parameter Setup Requirement

Note that advanced parameters require a program box.

Standard Parameters

Running Mode / 'Blinky' Mode

Explanation of different running modes and 'Blinky' mode.

Drag Brake Force

Setting for automatic brake application when returning throttle to neutral.

Low Voltage Cut-Off

Function to prevent battery over-discharge by monitoring voltage.

Start Mode 'Punch'

Adjusts initial throttle punch for acceleration.

Max Brake Force

Parameter for adjusting maximum braking force.

Max Reverse Force

Parameter for adjusting maximum reverse power.

Initial Brake Force (Minimum Brake)

Neutral Range

Overheating Protection

Restore Default Settings

Program Box

PC Software

Advanced Setup Parameters

Boost Timing

Boost Start RPM (Stock Firmware Only)

Boost Timing Acceleration (Stock Firmware Only)

Turbo Timing

Turbo Slope Rate

Turbo Delay