Need help?Do you have a question about the Orion OR-S7020i and is the answer not in the manual?
General| Brand | Orion |
|---|---|
| Model | OR-S7020i |
| Category | Security Camera |
| Language | English |
Detailed descriptions and diagrams of physical parts for both outdoor and indoor camera models.
Details on network, audio input/output, power, and alarm connectors for the camera.
Explanation of status LEDs, reset button, SD card slot, and video output functionality.
Instructions for removing the mount adapter from the outdoor camera using hex screws.
Procedure for attaching the silica gel accessory to the inner dome with double-sided tape.
Steps for aligning safety wires, connecting cables, and securing the dome cover.
Steps to attach the wall mount bracket to the wall using anchor bolts.
Procedure for placing and tightening the mount adapter into the wall mount bracket.
Instructions for attaching the ceiling mount bracket to the ceiling with anchor bolts.
Procedure to place and rotate the mount adapter into the ceiling mount bracket.
Steps for aligning safety wires, connecting cables, and securing the dome cover for ceiling mount.
Steps for drilling a ceiling hole and connecting the safety wire to secure the camera.
Procedure for tightening the mounting wing screws to secure the camera in the ceiling.
Steps for securing tapping screws and inserting/twisting the dome cover to secure it.
Step-by-step instructions to access the camera's live view through a web browser after login.
Configuration advice for accessing the IP Camera remotely over the internet via router/firewall setup.
Instructions on how to adjust the camera's lens position for optimal viewing.
Details on controlling live view features like zoom, focus, snapshot, and stream playback.
Explanation of RTP, RTSP, UDP, Unicasting, and Multicasting for H.264 video streams.
Guidance on selecting appropriate protocols (RTP+RTSP, Multicasting, Unicasting) for H.264 streaming.
Settings for enabling or disabling the analog video output and selecting the video format.
Detailed configuration of video streams, including codec, resolution, frame rate, and bit rate.
Configuration of video compression codecs (H.264, MJPEG), resolution, frame rate, and bit rate.
Adjustments for exposure control, white balance, image properties, and focus.
Enabling/disabling audio functions and adjusting microphone and speaker volume.
Configuration of live view protocols, buffering time, and OSD (On-Screen Display) options.
Setting up privacy masks to block specific areas of the camera's view.
Settings for SD card overwriting, status check, safe removal, and erasing image files.
Configuring the camera to write images to the SD card when specific events occur.
Setting up the camera to periodically write images to the SD card based on intervals and schedules.
Setting up FTP server details, client configuration, and send mode (Active/Passive).
Configuring the camera to send images to an FTP server when specific events occur.
Setting up the camera to periodically upload images to an FTP server based on intervals and schedules.
Configuring alarm inputs and outputs, including operation mode and duration.
Setting up motion detection areas, sensitivity, and enabling/disabling the feature.
Mapping events like Alarm In or Motion to trigger actions like email notifications.
Configuring IP address settings, DHCP or static IP, and DNS server information.
Setting HTTP and RTSP port numbers, and configuring port forwarding.
Defining RTP (Real-Time Transport Protocol) settings for audio and video delivery.
Configuring email notifications, frequency, server details, and security settings.
Enabling and configuring Dynamic Domain Name System (DDNS) for camera access.
Toggling Universal Plug and Play (UPnP) functionality for automatic network configuration.
Configuring PTZ preset freeze, power-up actions, parking actions, and wait times.
Managing PTZ presets, including naming, saving, moving, and deleting presets.
Setting up scan names, speed, dwell time, and direction for PTZ scanning between presets.
Configuring PTZ tours by selecting presets, scans, and setting movement speed and dwell time.
Adding, deleting, and managing user accounts with different permission levels.
Configuring the camera's date, time, time zone, and NTP synchronization.
Performing system maintenance tasks like rebooting, factory resets, and firmware upgrades.
Displaying important system information such as software version, model, and network details.
List of items included with the IP Camera, such as manuals, cables, and tools.
To Next Page
