3.6 FTP
3.6.1 Config
This section is provided to set-up a FTP (File Transfer Protocol) server so the IP Camera can send
recorded images to the server.
o Server Configuration:
FTP Server: Enable or Disable the FTP Server function for downloading recorded
images.
o Client Configuration:
Server IP: Enter the desired FTP Server’s IP address.
Port: Enter the desired FTP Server’s Port number. Default: 21, Range 1025-65535.
User name: Enter the FTP Server client user name.
Password: Enter the FTP Server client password
Send Mode: Choose whether the send mode is Active or Passive.