3.4 Live
3.4.1 Setup
This section allows for general viewer settings to be adjusted.
o Viewer Setup:
LiveView Protocol: Choose which protocol to use for live video. RTP Unicast
(UDP), RTP Multicast (UDP), or RTP over RTSP (TCP) can be selected.
Buffering Time: Buffering time can be set for a number between 0-90 times 1/30
seconds, or a range of 1-3 seconds.
o Viewer OSD Setup:
Resolution: Toggle OSD Resolution ON/OFF.
Date/Time: Toggle OSD Date/Time ON/OFF.
Event State: Toggle OSD Event State ON/OFF.
3.4.2 Privacy Mask