Orion Vortex R10 pro - PC Software

18 Copyright Team Orion © 2014
PC SOFTWARE
The PC computer software is mainly used to update/modify
the ESC or program box rmware. If you wish to install the
“stock” motor rmware into your ESC, you need to use the
optional program box to connect your ESC to your computer
and use the PC software.
• You can download the PC software for free from our
website www.teamorion.com/R10-downloads.html
• The program box is required to connect your ESC to the
computer/PC software.
• The PC software allows you to update/modify your
program box and ESC rmware.
• The PC software allows you to modify all of the ESC
settings (as with the program box).
• The PC software currently only works with the Windows
operating system.
SETTING PROFILES
The ESC can store 3 dierent setting proles, which means
that you can have three sets of dierent settings stored
inside the ESC’s memory. To be able to access this function,
you need to use the optional program box.
MODIFIED AND STOCK MOTOR FIRMWARE
There are two rmware types available for the R10PRO ESC.
Out of the box, the “modied” motor rmware is installed
inside the ESC and the rmware designed for “stock” motors
can be installed via the PC software. The “stock” motor
rmware features extra and more extreme timing settings.