ORKA EH-PTC - Maintenance and Safety; Overheat Protection; Cleaning and Maintenance; Environmental Disposal

9
OVERHEAT PROTECTION
This heater is protected with an overheat protecon that switches o the
appliance automacally in case of overheang. For example: due to the total or
paral obstrucon of the vents. In this case, unplug the appliance, wait about
30 seconds for it to cool and remove the object which is obstrucng the vents.
Then switch it back on as described above. The appliance should now operate
normally. If the problem persist, please contact Customer Service for assistance.
CLEANING & MAINTENANCE
• Before undertaking any cleaning or maintenance on the appliance,
disconnect it from the power supply.
• For cleaning it is recommended to use a so moist rag and neutral
detergent. Do not use an abrasive cloth or devices which could aect
the appearance of the appliance. Check that the hot air outlet and the
venlaon inlet are free of dust and dirt.
During cleaning, be careful not to touch the heang elements.
• To open the lter on the back for cleaning, press the top of plasc net at
back.
• In case of breakdown and/or poor funconing of the appliance, disconnect
the appliance from the power supply and contact an authorised repairer.
NOTE: As a result of connual improvements, the design and specicaons of
the product within may dier slightly to the unit illustrated on the packaging.
ENVIRONMENT
Meaning of the crossed-out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collecon facilies. Contact your local council for informaon
regarding the collecon systems available.
If electrical appliances are disposed of in landlls or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.