Need help?Do you have a question about the ORKA EH-PTC and is the answer not in the manual?
General| Power | 2000W |
|---|---|
| Voltage | 220-240V |
| Color | White |
| Frequency | 50Hz |
| Heating Technology | PTC Ceramic |
| Thermostat | Adjustable |
| Safety Features | Overheat Protection |
Read instructions carefully, check for damage, avoid hazardous materials, and ensure proper electrical connections.
Secure heater horizontally, avoid combustible gas, do not cover vents, and pull plug when not in use.
Do not use with wet hands, stop if motor malfunctions, keep doors/windows closed, and avoid bathroom zones.
Remove battery before disposal, dispose of batteries safely, and contact qualified personnel for repairs.
Appliance use by children aged 8+ with supervision; caution for hot parts.
Model EH-PTC, Voltage 220-240V~50/60Hz, Power 2000W.
Install heater horizontally 2m above floor, securely on a flat surface, away from cables and pipes.
Set the current time (Hour, Minute, Week) using the remote or control panel.
Switch between Cool Air, Warm Air, Hot Air, and Swing functions using the MODE button.
Set the heater to operate automatically for up to 24 hours.
Set desired temperature (10-49°C); heater adjusts heating power based on ambient temperature.
Program daily schedules (P1-P5) for heating duration and temperature throughout the week.
Automatically stops heating if temperature drops >= 3°C, conserving energy.
Set delayed start (open time) or stop (close time) for the heater.
Locks all controls to prevent unauthorized operation.
Visual guide to control panel buttons and remote control functions.
Heater automatically switches off if overheating occurs; unplug and remove obstruction.
Disconnect power; clean with a damp cloth and mild detergent; ensure vents are clear.
Do not dispose of as unsorted municipal waste; use separate collection facilities.
To Next Page