ORKA EH-PTC - Window Open Function

6
3.P6 is user-dened,press “ ” two buons select P6 model,
WEEK Press “ ” buon 1st me,”” lights on, means “Monday”.
HOUR Press “ ” buon 2nd mes, LED display front “00” ashes,
press “ ” two buons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE Press “ ” buon 3rd mes, LED display behind “00” ashes “ ”
two buons set the Hours from 00--59(01=1 Minute,02=2 Minute ect.)
With the “ ” light on,it means open me.
HOUR Press “ ” buon 4th mes, LED display front “00” ashes,
press “ ” two buons set the Hours from 01--00(01=1 o’clock,02=2
o’clock...00=24 o’clock ect.)
MINUTE Press “ ” buon 5th mes, LED display behind “00” ashes “ ”
two buons set the Hours from 00--59(01=1 Minute,02=2 Minute ect.)
With the “ ” light on,it means close me.
The above are nised set Monday Timer.
4. Press “ ” buon once more, “ ” lights on,means “Tuesday”. Pls noted
that the operate with open me HOUR/MINUTE and close me HOUR/
MINUTE are all same as before Monday.
5. From Monday-Sunday are all set nished,press “ ” buon on remote
control 7th mes to set from Monday to Sunday’s temperature and press “
” two buons,select the temperature which you need,the temperature
range from 10
o
C to 49
o
C.
PS: In Week mer funcon,when you set today’s temperature,the thermostat
funcon will start,the rules same as 4) THERMOSTAT INSTRUCTIONS,pls
noted.
You can set dierent open me ,closed me and temperature within whole
week.
6) Window Open Funcon
1. Open the appliance as working condions,(fan,warm,hot are all ok).This
funcon only through by Remote control.
2. Press “ ” buon, the “ ” light is on.The appliance is working as smart
saving energy models.(In this funcon,the appliance is check and record
environment temperature in immediately.It will stop working, when the
appliance check the environment are drop ≥ 3
o
C.The user should restart
the appliance with “ON/OFF” buon)
3. Press “ ” buon again, the “ ” light is o.Window Open Funcon is
closed.