ORKEL MP 2000 - 5.1.10- Wide film - Net binding

66
-
The Hit - unit, containing wide lm or net is located on top
of the chamber. ( - gh ension)

1. Clean and lubricate the slides for feeder rollers.
2. Check chain tension and its condion. Adjust the tension by loosen the bolt and turn the nylon eccen-
tric to add more tension to the chain. Then reghten the bolt.
3. Check all movable parts and bearings in the HiT -unit.
4. Check the condion of hydraulic hoses and couplings. Exam the unit for any leakages
5. Control the free wheel’s funcon (feeder rollers).
Feeder, motor
Feeder rollers
Free wheel