IG-183-EN version 06; 31/03/2020
61
General instructions
cgm.3 system: medium voltage SF
6
gas-insulated
cubicles up to 38 kV according to IEEE and CSA standards
Recommended sequence of operations
6. Insert the fuse holder carriage in its compartment by
pulling it inward.
Before inserting the fuse holder carriage in the fuse
protection cubicle, ensure that both the carriage
as well as the inside of the fuse holder are properly
cleaned.
Figure 5.27. Inserting the fuse holder carriage
7. Reset the fuse striker by pressing downward with the
thumb.
Figure 5.28. Resetting the striker in the fuse holder cover
To Next Page
Loading...
