INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 AS
PAGE 105
JUN 29/2022
© 2022 Orolia S.A.S. All rights are strictly reserved.
7. Water Switch Activation
The ELT switch must be in the “ARM” position and the Water Switch
Sensor must be connected.
Fasten the ELT to the liferaft with the tether line.
Put the ELT in the water to float safely.
Check that buzzer operates and visual indicator flashes
periodically.
The ELT should float with
antenna in vertical position
To Next Page
Loading...
