Orolia KANNAD 406 AS User Manual

DMA176N
TP PAGE: 1
Date of rev. JUN 29/2022
Revision 12
First issue: JUL /1999
Emergency Locator Transmitter
Orolia S.A.S.
INSTALLATION MANUAL
OPERATION MANUAL
KANNAD 406 AS
P/N: S1823502-02 ELT, KANNAD 406 AS (BNC)
P/N: S1823502-03 ELT, KANNAD 406 AS (TNC)
P/N: S1820514-14 WATER SWITCH SENSOR
P/N: S1820511-02 MOUNTING BRACKET, AS
P/N: S1820511-05 MOUNTING BRACKET, AS-PLUS
P/N: S1820511-03 CARRY-OFF BAG, AS
P/N: S1820511-03 CARRY-OFF BAG, Short
© 2022 OROLIA S.A.S. ALL RIGHTS ARE STRICTLY RESERVED.

Orolia KANNAD 406 AS Specifications

General

Brand	Orolia
Model	KANNAD 406 AS
Category	Transmitter
Language	English

Summary

INTRODUCTION

SYSTEM OVERVIEW

COSPAS-SARSAT System Description and Global Operations

Overview of the COSPAS-SARSAT system, its global coverage, and environmental testing of ELTs.

KANNAD 406 AS Presentation

Design Features

General and Mechanical Aspects

Describes the ELT's survival purpose, construction, materials, and floating capabilities.

SYSTEM FUNCTIONAL DESCRIPTION AND OPERATION

Transmitter, Controls, Modes, and Endurance

Explains transmitter function, controls, operating modes, indicators, and battery endurance.

Technical Specifications

Activation and Reset Procedures

Manual and Water Switch Activation

Details how to manually activate the ELT and activate it via the water switch sensor.

ELT Resetting Procedure

Explains how to stop an unintentionally activated ELT by switching it to the OFF position.

INSTALLATION / REMOVAL

Registration and Programming

Details mandatory registration and programming protocols for the ELT prior to installation.

Installation Methods and Procedures

Covers installation using carry-off bag and mounting bracket, including packing and bracket setup.

Removal Procedures

Outlines steps for safely removing the ELT from its carry-off bag or mounting bracket.

CHECK Procedures

Self-test Periodicity and Procedure

Recommends self-test frequency and outlines the step-by-step procedure for testing the ELT.

TROUBLESHOOTING

General Fault Isolation and Repair

Explains using the visual indicator for fault isolation and mentions repair restrictions.

Self-test Faults and Buzzer Issues

Details specific faults indicated by flashes and buzzer behavior, with troubleshooting steps.

SCHEMATICS & DIAGRAMS

Outline Dimensions and Drilling Mask

Provides physical dimensions of the ELT and a drilling mask for mounting bracket installation.

SERVICING

Maintenance Schedule and Battery Replacement

Outlines requirements for periodic inspections, battery replacement intervals, and approved service centers.