To Next PageTo Next Page
Need help?Do you have a question about the Orolia S1822502-02 and is the answer not in the manual?
General| Brand | Orolia |
|---|---|
| Model | S1822502-02 |
| Category | Transmitter |
| Language | English |
Describes the KANNAD 406 ELT transmitter's operation on 121.5, 243, and 406 MHz frequencies.
Details the 'Self-Test' mode for checking ELT characteristics and communication.
Describes the 'ARM' mode, essential for automatic activation and mandatory during flight.
Details the electrical connections, including DIN12 and BNC connectors for the ELT.
Instructions for setting the ELT to standby mode for automatic crash sensor activation.
Procedure for manually activating the ELT using the ON switch or remote control.
Steps for performing a manual reset of the ELT by switching it to OFF then ARM.
Procedure to reset the ELT using the 'RESET & TEST' function on the remote control panel.
Provides FAA and RTCA recommendations for ELT and bracket installation.
Step-by-step instructions for installing the ELT mounting bracket on the aircraft structure.
Describes the initial operational tests for ELTs, with and without a programming dongle.
Details the operational tests for the Remote Control Panel (RCP), checking LED and buzzer functions.
Explains tests for checking the ELT-Antenna link and transmission on 406 and 121.5 MHz.
Explains how the visual indicator and self-test capability aid in fault isolation.
Details interpretation of visual indicator flashes during self-test for fault diagnosis.
Describes the meaning of different flash patterns from the ELT's visual indicator.
