PAGE: 212
MAR 30/2020
INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 AF / AF-H / AF (6D)
© 2020 Orolia S.A.S. All rigths are strictly reserved.
5. ELT Removal
• Switch the ELT to OFF (Refer to Figure 207: Installation, controls and
connectors).
• Disconnect the Remote Control Panel (or CS144) from the DIN12
connector (Refer to Figure 207: Installation, controls and connectors).
• Disconnect the outside antenna from the BNC connector (Refer to Figure
207: Installation, controls and connectors).
• Unfasten the self-stripping strap.
• Remove the transmitter from the bracket.
Figure 209: Removing the transmitter
CAUTION: WHEN ACTIONING THE ARM/OFF/ON SWITCH, PULL LEVER
TO UNLOCK AND SET TO POSITION.
To Next Page
Loading...
