SecureSync 2400 Option Card Field Installation Guide • May 4, 2021
Page 1
© Orolia 2019 • orolia.com
Document Part Number 2400-5000-0052 Rev 2
Purpose of this Document
The SecureSync 2400 time and frequency synchronization system offers customizability and expandability via
the addition of a range of modular option cards. Depending on your unit's specifications, up to 6 cards can be
accommodated to offer not only synchronization to a variety of input references, but also numerous types of out-
put signals, supporting an extensive number of traditional and contemporary timing protocols.
Typically, SecureSync units are shipped with custom-ordered option cards pre-installed at the factory. In the
event that an option card is purchased at a later time, field installation will be necessary. This option card install-
ation guide contains information and instructions for installing option module cards in your SecureSync unit.
This procedure should only be attempted by qualified personnel, while following the enclosed safety instructions.
Note: The installation procedure varies, depending on the type of option card and the installation
location to be installed. Read instructions completely before beginning.
Option Card Field Installation Guide
SecureSync 2400
Technical Note
To Next Page
Need help?
General
