To Next PageTo Next Page
Need help?Do you have a question about the Oromed ORO-N2 BASIC and is the answer not in the manual?
General| Product Name | ORO-N2 BASIC |
|---|---|
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Cuff size | 22-32 cm |
| Measurement Method | Oscillometric |
| Accuracy | ±3 mmHg |
| Power source | Batteries |
| Battery type | 4 x AAA |
| Display | LCD |
| Automatic Shut-off | Yes |
| Irregular Heartbeat Detection | Yes |
| WHO Indicator | Yes |
| Pulse measurement range | 40-199 beats/min |
| Pulse accuracy | ±5% |
Important safety precautions including suitability for neonates, infants, and pregnant patients.
Important warnings and precautions regarding device usage, components, and environments.
Explanation of how blood pressure levels are determined and change during heart activity.
Guidance on interpreting blood pressure readings and identifying normal, high, or low values.
Additional advice on interpreting readings and actions to take for high or low blood pressure.
Explanation of the various symbols displayed on the monitor's LCD screen.
Overview of the key functionalities and specifications of the ORO-N2 BASIC model.
Instructions for installing, replacing, and managing batteries for the blood pressure monitor.
Instructions for selecting or configuring user profiles (User A or User B) for data storage.
Steps for setting the year, month, date, and time format (12/24 hour) on the device.
Procedure for deleting stored measurement data from the device's memory.
Instructions on how to properly connect the cuff tube to the blood pressure monitor.
Guidelines on patient posture, environment, and pre-measurement actions for accurate results.
Factors that can lead to inaccurate blood pressure readings and how to avoid them.
Detailed step-by-step instructions for performing a blood pressure measurement.
Recommended posture and positioning for the patient during measurement for optimal accuracy.
Key recommendations and best practices for using the blood pressure monitor effectively.
Explanation of the irregular heartbeat symbol and when to consult a doctor.
Explanation of error codes displayed by the monitor and recommended solutions for each.
Guide to identifying and resolving common operational problems and errors with the device.
Explanation of various symbols used on the monitor and accessories, including standards and compliances.
How to identify a low battery and the procedure for replacing batteries in the monitor.
Guidelines for protecting the device from environmental factors like temperature, humidity, and dust.
Instructions for cleaning the device, cuff, and tube, along with handling and warranty precautions.
Information on the proper disposal of batteries and electronic components according to regulations.
Details on the device's adherence to European standards and electromagnetic compatibility regulations.
Specifies the recommended temperature, humidity, and pressure altitude for operating the device.
Details on the device's classification, including power source, applied part type, and operational mode.
Information on electromagnetic immunity requirements and guidance for the device's operation environment.
Details on immunity to voltage variations and power frequency magnetic fields, with environmental guidance.
Guidance on RF immunity, including recommended separation distances for portable and mobile equipment.
Notes on RF field strengths and environmental propagation affecting EMC compliance.
Information on RF emissions, harmonic emissions, and voltage fluctuations to ensure EMC compliance.
Table of recommended separation distances for RF communications equipment to prevent interference.
