– 41 –
12 User B
13.User A
1 Average function;
2 2x120 memories (double users);
3 Date/time display;
4 External Power adapter support;
5 Display Battery compartment;
6 Arm cuff
7 Memory (MEM) button
8 START/STOP button
9 Date/Time Setting
Arm circumference should be measured with a measuring tape
in the middle of the relaxed upper arm. Do not force cuff connection
into the opening. Make sure the cuff connection is not pushed into
the AC adapter port.
Use only 1.5V “AAA” alkaline batteries with this device.
1. Press the hook on the bottom of the battery cover and lift the
cover off in the direction of the arrow.
2. Install 4 “AAA” size batteries so the + (positive) and (negative) po-
larities match the polarities of the battery compartment, replace
the battery cover.Make sure that the battery cover is securely in
position
Low Battery Indicator
1. When the Low Battery Indicator appears on the display, turn the
monitor off and remove all the batteries. Replace with 4 new bat-
teries at the same time. Alkaline batteries are recommended.
To Next Page
Loading...
