What to Expect with Your Installation
Must be able to
secure the fan
to building
structure or fan-
rated outlet box
30 inches
from blade
tip to nearest wall or
obstruction
You may need a
friend to help you.
Assess location
Angled Ceilings are
not supported.
7 feet from bottom
edge of blade to the
floor
Check box to see
fan weight
4
Angled Ceiling
not supported.
X
Step 1. Take out the fan housing and bracket assembly from the box.
Step 2. Remove the blade cover from the fan housing by loosing the screws on it.
Step 3. Secure the fan blades onto the fan housing with screws provided. Make
sure the beveled side facing the ground.
Step 4. Place the blade cover back to the fan housing with screws taken off.
NOTE:
Make sure to assemble the blades in sequence and fasten the screws with
equal force.
2. Assembling the Fan Blades
Fan Housing
Blade Cover
Fan Blade
To Next Page
Loading...