Need help?Do you have a question about the Ortofon RS-212 and is the answer not in the manual?
Details physical dimensions of the Ortofon RS-212 tonearm.
Provides key technical specs: effective length, tracking angle, etc.
Lists the weights for the cartridge and the pickup arm itself.
Lists screws, washers, and nuts for mounting the tonearm.
Lists screws, spacers, and plates for installing a cartridge.
Outlines steps to achieve correct plug-in-shell weight for zero balance.
Specific instructions for mounting the Ortofon S 15/T cartridge.
Specific instructions for mounting SPU/T and SPE/T cartridges.
Details placing the shell, holding the cartridge, and aligning mounting holes.
Covers inserting screws, securing the shell, and initial balancing checks.
Details the ranges for counterbalance adjustments with and without the counterweight insert.
Explains how to apply and adjust stylus pressure using the counterweight knob.
Details how anti-skating force is applied and its relation to stylus pressure.
General| Effective Length | 212 mm |
|---|---|
| Material | Aluminum |
| Stylus Pressure Range | 0-3 g |
| Armtube Material | Aluminum |
| Anti-skating | Magnetic |
To Next Page
