Need help?Do you have a question about the Ortofon 2M Red and is the answer not in the manual?
Connect tone arm leads using colour and channel indications for correct setup.
Ensure proper screw length for headshell mounting to avoid cartridge damage.
Set tone arm parallel to record, adjust anti-skating and stylus pressure.
General| Output Voltage | 5.5 mV |
|---|---|
| Tracking Force | 1.8 g |
| Stylus Type | Elliptical |
| Cartridge Weight | 7.2 g |
| Channel Separation | 22 dB at 1 kHz |
| Channel Balance | 1.5 dB |
| Frequency Range | 20-22, 000 Hz |
| Stylus Tip Radius | r/R 8/18 µm |
| Tracking Force Range | 1.6-2.0 g |
| Internal Impedance, DC Resistance | 1.3 kOhm |
| Recommended Load Resistance | 47 kOhm |
| Type | Moving Magnet |
| Recommended Load Capacitance | 150-300 pF |
| Replacement Stylus Unit | 2M Red |
| Tracking Ability | 70 µm at 315 Hz |
To Next Page
