Ortofon 2M Red - Connecting Tone Arm Leads; Using Correct Screws for Mounting

2. Note colours and channel indications on rear side of the body for correct connection of
the tone arm leads. (fig. 3)
3. The Ortofon packing contains a pair of screws with a thread length of 5 mm. The
screws are to be used with headshell thicknesses of max. 3.5 mm. The 2M threaded
mounting plate has a thickness of 3 mm.
Fig. 3 Fig. 4
White L+
Red R+
Green RG
Blue LG
To check that you are using the right length of screws – please observe that screws must
not touch the body under the mounting plate – look into the small openings on each side
of the body. (fig. 4)
2M Verso bottom mount2M top mount