AutoFire® Kiln Controller User’s Guide
8
Cone Fire Example
Fire to Cone 6, increase firing speed 20%, and add a 15-minute hold.
(controller temperature is displayed in °F)
Just follow these simple steps:
Step Press Description Display
1 CONE FIRE Enters the Cone Fire mode. 06, 1828
2 UP ARROW (Press UP ARROW 11 times)
Scrolls to display of 6 (Cone Number). 6, 2231
3 ENTER Selects cone number 6. Hd, . 0
4 UP ARROW (Press UP ARROW 3 times)
Scroll to display of 15 (Hold Time). Hd, . 15
5 ENTER Selects the displayed hold time. IdLE
6 OPTIONS Selects options menu. SPd
7 ENTER Selects SPd (speed) option Std
(default is standard)
8 RIGHT ARROW ( Press RIGHT ARROW 2 times)
Scroll to display of F 20 (Speed) F 20
9 ENTER Selects 20% firing speed increase SPd
10 UP ARROW Scroll to display of rEtn (or wait 20 seconds) rEtn
11 ENTER Returns to IdLE mode IdLE
12 STOP/ START Starts the selected cone firing. 0074, (current kiln
temperature)
Note! The actual kiln temperature is displayed during an active firing cycle.
13 - When the active firing cycle is completed. The final CPLt, Final
temperature reached by the kiln will be alternately Temperature
displayed with the CPLt display.
14 STOP/START Acknowledges completion of the completed firing IdLE
cycle and returns to IdLE mode. Also functions
as the Abort (Abrt) during a firing process. Abrt
To Next Page
Loading...
Need help?
General