AutoFire® Kiln Controller User’s Guide
6
QUICK REFERENCE SECTION
This Quick Reference Section is to help familiarize you with the most often used features of your AutoFire®
Kiln Controller. Guides to Cone Firing, User Programs, Display References, and Alarm References are
included. We recommend you read the entire User’s Guide to become familiar with all the exciting benefits and
features of your AutoFire®.
The Keypad
• Ergonomically designed 8-button Keypad
• High brightness 4-digit, 7-segment LED display
• Audible feedback
• Washable high-tech graphic panel
The eight buttons on the AutoFire® keypad provide the following functions:
ENTER - load whatever is displayed into memory, and to acknowledge deviation and PLOG
alarms, if they occur.
START/STOP - begin or end a firing, to store a user’s program, and to acknowledge ‘CPLt’ or
‘Abort’ shown in the display
CONE FIRE - select a cone number from preset programs (Page 3)
USER PROGRAM - input your own program (Page 5)
DELAY START - input a time delay in minutes
OPTIONS - access other features (Page 7&8)
ARROWS - change the display, and scroll through options
The AutoFire® may be ordered without Cone Fire programs, thus on some models, the keypad may not show
the Cone Fire button. Those working in glass do not need Cone Fire programs, but will still benefit by the
advanced features of the AutoFire®.
To Next Page
Loading...
Need help?
General