EasyManua.ls Logo

Ortovox S1 - ORTOVOX S1 Quick Test Procedure; Transmitter Test Procedure

Ortovox S1
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
51
ENGLISH
If a fault turns up on the checked device then the war-
ning triangle appears on the display. The warning trian-
gle signals a serious device fault on the checked device.
Possible faults can be queried by pressing
the -button (2).
Deviation from the
Transmission frequency (457 kHz)
Transmission period
Period length
Go back to the short test using the -button (2).
If a fault is displayed please send your transceiver directly to your ORTOVOX
service office for inspection (see page 164).
QUICK TEST
with limited range
(test of the transmitters)
The group leader sets his/her S1
to transmit test” via menu item
(= limited range).
If the S1 receives an audible (via the loudspeaker) and
visible signal (circle with 2 persons) from each individual
avalanche transceiver then the transmission function of
the units to be tested and the reception function of the
group leader are in order.

Other manuals for Ortovox S1

Related product manuals