ORVIBO OLOCK - Testing Smart Lock Operations; Lock and Unlock Testing Procedures

⑤ Turn the thumb knob to check whether the deadbolt is
retracted. If the deadbolt does not work smoothly, adjust
the screws and install the mounting plate again.
① Insert 4 pcs AA batteries into the battery compartment
matching the polarity (+/-) indicated.
Note:
a. Newandoldbatteriescannotbemixed,anddifferentbrands
ofbatteriescannotbemixed.
b. Please replace the dead batteries in time, otherwise there is
a risk of unlocking failure or battery leakage resulting in lock
damage.
② Install the battery cover with a screwdriver (not provided).
Step 5: Install Batteries and Battery Cover.
Now you have completed the installation of the OLOCK!
Please follow the instructions to set up and use the smart lock.
12