The machine is equipped with the following safety features :
The Main switch can be secured with a pad lock to prevent unauthorised use or
when servicing the machine.
The Emergency Stop Switch breaks the electrical circuit immediately it is
used. When the switch is reset the machine will not restart. The start button
has to be pressed again. The press plate always returns upwards to a safe
position.
Target, mechanical and electrical limit switches prevent the machine being
used with the doors open or when the press head is moved between
chambers.
Front and rear covers protects the operator from moving parts of the machine.
The electrical circuits of the machine are protected by a circuit breaker
which also serves to protect the motor.
To Next Page
