The ORWAK 8020 is a unique baling press with advanced construction and
design. IF well maintained the ORWAK 8020 will give many years of reliable
service.
The ORWAK 8020 is a quality product. As a quality aware Company AB
ORWAK wishes to see that the ORWAK 8020 is used only for the correct
purposes and that the safety instructions are followed. The Instruction Manual
should be read thoroughly so that the ORWAK 8020 can be installed, operated
and maintained properly.
Our warranty requires that the usage and safety instructions are followed and
that only original spare parts and recommended hydraulic oil and lubricants are
used.
MACHINE identity plate.
The machine identity plate is located at the front of the press head. It gives the
following data: machine type, serial number, month and year of manufacture
and electrical data.
The user of the machine is responsible for the safety checks,
inspections and carrying out the daily maintenance routine.
The user is responsible for ensuring that any faults are corrected and
that the ORWAK 8020 is maintained in such condition so as to avoid
accidents to any operator.
The owner is responsible for ensuring that all National and Local Laws
are complied with when using the ORWAK 8020.
To Next Page
