To Next PageTo Next Page
Need help?Do you have a question about the OSAKA VACUUM TC223 and is the answer not in the manual?
General| Brand | OSAKA VACUUM |
|---|---|
| Model | TC223 |
| Category | Power Supply |
| Language | English |
Read this manual carefully for understanding functions and correct handling.
Company warrants power supply quality per standard warranty conditions.
Covers input power, pump combinations, fan mode, earth, cables, and disassembly.
Avoids electric shock, extreme environments, dust, gas, fields, vibration, and space issues.
Verify power supply and attachments are undamaged and complete upon receipt.
Controls motor current and output voltage for efficient pump operation and quick starts.
Detailed specifications including input/output voltage, frequency, power, and ratings.
Details on input voltage switch, function, start, and stop/reset buttons.
Explains how operation status, speed, time, and modes are displayed.
Procedure to enter MAINTENANCE MODE and navigate parameters using function buttons.
Configuring no-load test and resetting total operation time.
Managing protection signals and fan disconnection detection settings.
Selecting between LOCAL, REMOTE, and SERIAL COMMUNICATION modes.
Using CRC code and viewing/clearing error (alarm) logs.
Details on acceleration, protection signal, and fan disconnection errors with remedies.
Troubleshooting for light load, motor cable, and over-current faults.
Addressing pump/PS overheat and input voltage dropping errors.
Handling over frequency, system errors, and bearing replacement warnings.
Procedure to reset over frequency and system errors by power cycling.
Using the STOP button to reset other types of errors in various operation modes.
Guidelines for installing the power supply in a rack or on the floor.
Detailed instructions for connecting input power, motor, fan, and remote cables.
Details on connector types and cables provided for input power, remote, motor, etc.
Steps for connecting the input power cable, including voltage selection.
Connecting motor, fan cables, and remote cable for control signals.
Explanation of signals for START/STOP, protection, acceleration, normal, failure, and brake.
Information on tuning and adjusting the display's LCD contrast.
Steps for performing a no-load test to check power supply functionality.
Operating the pump via buttons or signals; power supply precautions.
Guidelines for handling the power supply as industrial waste when discarding.
Contact details for head office, Tokyo, Seoul, and Shanghai offices.
Contact information for US branch and global service centers.
Details on product warranty, coverage, and user indemnification for damages.
Exclusions from warranty and the governing law for disputes.
