To Next PageTo Next Page
Need help?Do you have a question about the OSAKA VACUUM TC1103 and is the answer not in the manual?
Details RS232C communication parameters like speed, parity, data bits, etc.
Describes the D-Sub 9-pin male connector and its pin layout for serial communication.
Explains cable requirements and connection diagrams for D-Sub 9-pin connectors with/without handshake.
Instructions for connecting the serial communication cable between the power supply and the host computer.
Steps to configure RS232C transmission parameters like speed, length, parity, and stop bit.
Details commands for configuring CRC, starting/stopping the pump, and setting rotational speed.
Commands to monitor the pump's total operational time, status, failure details, and output frequency.
Lists error codes returned by the power supply when the host computer sends an irregular command.
Defines the signification of pump status codes returned by the "RSS" command.
Lists alarm codes and their meanings for the "RSA" command, specific to certain pump models.
States the warranty that the product is designed and manufactured according to standards and has no defects.
Details the company's commitment to correct, repair, or replace defective parts within the warranty period.
Lists conditions under which the warranty and indemnification do not apply, such as improper usage or external damage.
Defines the limits of indemnification, excluding consequential damages and business losses.
General| Frequency | 50/60Hz |
|---|---|
| Efficiency | 85% |
| Storage Temperature | -20°C to +70°C |
| Safety Standards | UL |
| Input Voltage | 100-240V AC |
