OSAKA VACUUM TC1813 - User Manual

H07401<2>
OPERATION MANUAL
SERIAL COMMUNICATION
POWER SUPPLY
FOR MOLECULAR PUMP
TC163H/TC203/TC223/TC353/TC523H/TC1104
TC443S/TC553/TC1003/TC1103/TC1503H/TC1813/TC3213
Before using the pump and the power supply, read carefully and understand
thoroughly the cautions in this manual.
Save this manual for future use and reference.
OSAKA VACUUM, LTD.
All manuals and user guides at all-guides.com
all-guides.com

Summary

Operation Mode Selection

Selecting SERIAL Mode

Step-by-step guide to set the power supply to 'SERIAL' mode for remote control.

Interface Specifications

Transmission Specifications

Defines communication parameters such as speed, parity, data bits, and stop bits.

Connector Specifications

Cable Specifications

Preparation for Serial Communication

Cable Connection Procedure

Transmission Configuration Steps

Guide to setting RS232C parameters like speed, length, parity, and stop bit via the display.

Protocol Specifications

Communication Protocol Details

Commands

Operation Commands

Commands to configure CRC, start/stop the pump, and check operational status.

Monitor Commands

Commands to read operational time, pump status, failure details, and output frequency.

Pump Status Codes

Troubleshooting

Troubleshooting Common Issues

Provides solutions for issues like no string transmission, irregular data, or CRC code errors.

OSAKA VACUUM TC1813 Specifications

General

Brand	OSAKA VACUUM
Model	TC1813
Category	Power Supply
Language	English