OSAKA VACUUM TC353 - User Manual

OSAKA VACUUM, LTD.
Document No. : ND00338-R06
INSTRUCTION MANUAL
POWER SUPPLY
For the pump
MODEL: TC163H
TC223
TC523H
TC203
TC353
TC1104
IMPORTANT
Read rule carefully for safe installation, operation and instruction.
Please keep this instruction manual by your side.
OSAKA VACUUM, LTD.

Summary

Introduction

Warranty

Precautions

Feature

Specifications

Buttons and display

Input voltage select switch

Configures input voltage for the power supply.

FUNCTION buttons (F1,F2,F3)

Buttons for mode selection, parameter confirmation/alteration.

START button

Initiates pump operation in LOCAL mode.

STOP;RESET button

Stops operation or resets errors.

Display

Shows operation status, speed, time, mode, errors.

MAINTENANCE MODE

Function for no-load test

Enables testing without pump connection.

Function for resetting total operation time

Resets the total operation time counter.

Function for canceling protection signal

Enables or disables protection signal interlocks.

Function for detecting fan disconnected

Detects fan faults and controls power.

Function for selecting operation mode LOCAL;REMOTE;SERIAL COMMUNICATION

Selects the method for operating the power supply.

Protective functions

Protective function

Details error messages and pump stopping behavior.

Warning function

Alerts users about potential issues like bearing wear.

Reset of error

Over frequency and System error

Procedures for handling frequency and system errors.

The others

General procedure to reset the power supply after errors.

Installation and electrical connections

Installation

Guidelines for mounting the power supply securely.

Electrical connections

Details how to connect cables to the power supply.

Maintenance and inspection

Tuning

Tuning is done before shipping; not required before operation.

Adjusting the depth of character in display (LCD contrast)

Adjusts display contrast for readability.

No-load test of power supply

Checks power supply function without pump connection.

Others

STANDARD WARRANTY CONDITIONS

Article 1 Warranty

States the warranty conformity to specifications.

Article 2 Indemnification

Covers damages and compensation for warranty breaches.

Article 3 Exception

Lists conditions not covered by the warranty.

OSAKA VACUUM TC353 Specifications

General

Category	Power Supply
Model	TC353
Input Voltage	100-240V AC
Input Frequency	50/60 Hz
Output Current	3A
Efficiency	85%
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C