To Next PageTo Next Page
Need help?Do you have a question about the OSAKA VACUUM TC163H and is the answer not in the manual?
Important consideration for safe operation of pump and power supply.
Important consideration to avoid injury or electric shock during operation.
Instructions for setting the input voltage select switch on the rear panel.
Usage of function buttons for maintenance mode and parameter alteration.
Procedure to press the START button for initiating pump operation.
Procedure to press the STOP/RESET button to halt or reset operation.
Explains how operation status, speed, and time are displayed.
How to perform a no-load test to check power supply functionality.
Procedure for resetting the total operation time counter.
How protective functions trigger error messages and stop the pump.
Resetting over frequency or system errors by power cycling.
Resetting other types of errors using the STOP button.
Steps for mounting the power supply in a rack or on a floor.
Steps for connecting the main input power cable.
Information on factory tuning and its necessity before operation.
How to adjust the LCD contrast for better display readability.
Steps to perform a no-load test to verify power supply operation.
Formal statement of the product warranty and its limitations.
Provisions for user indemnification in case of warranty breach.
Conditions under which the warranty does not apply.
General| Frequency | 50/60Hz |
|---|---|
| Efficiency | 85% |
| Protection Features | Overcurrent protection, Overvoltage protection |
| Cooling Method | Natural Convection |
| Weight | 500g |
| Storage Temperature | -20 to +85°C |
