- 19 -
90°
EN
Adjusting the head support
• Loosen the belt and pull the lever on the headrest
until it is at the desired height.
• Release the lever and make sure that the headrest
is locked.
Opening/closing the belt
• To release the belt, press the red button on the
belt lock and separate the two belt tongues.
• To close the belt, rst pull together the two belt
tongues and slide these into the belt lock together.
Adjusting the belt
• To loosen the belt, press the belt adjustment but-
ton at the front of the seat with one hand.
• Use your other hand to hold the belt lock with the
belts and loosen it.
• If your child is fastened in, pull on the front adjust-
ment tab to tighten the belt.
Please always make sure to adjust the straps so that
they rest on the shoulders of the child.
To Next Page
Loading...
