osann Four360 - INSTALLATION OF THE CHILD CAR SEAT; Group 0+;1 (rearward facing)

- 22 -
EN
INSTALLATION OF THE CHILD CAR SEAT
Group 0+/1 (rearward facing)
(For children from 0 to 18 kg)
1
2
• Press both side buttons on the
Isox connectors to extend them in length.
• Insert the Isox connectors into the insertion
guides and press until you hear a click.
• The indicator on both sides will only turn
green when the connections are made.
Slide the child car seat towards the backrest until
it is securely in place.
• Remove the Top-Tether from the bag.
• To release the top tether, press the grey button
with one hand and pull the side of the belt an-
chor to the required length with the other hand.
• Pull the Top-Tether through the belt guide, which
is marked in blue, on the reverse side of the child
car seat.
• Fix the anchor to the xation point on the back
of the car seat.
• Pull the Top-Tether tight by pulling on the other
side of the belt. Make sure the indicator is green.
• The baby insert and the comfort insert are
suitable for infants under 6 kg.
• If the body weight is more than 6 kg, the
baby insole is not required.
• Adjust the height of the head support to the
size of the child.
3