EasyManua.ls Logo

Osburn 2400 - User Manual

Osburn 2400
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
READ AND KEEP THIS MANUAL FOR REFERENCE
45110A
Printed in Canada 16-08-2013
OWNER`S MANUAL
2400 MODEL STOVE
US ENVIRONMENTAL PROTECTION
AGENCY PHASE II CERTIFIED
WOODSTOVE
Verified and tested following
ULC S627 and UL 1482 Standards
by:
Manufactured by: STOVE BUILDER INTERNATIONAL INC.
250, de Copenhague, Saint-Augustin-de-Desmaures (Québec) G3A 2H3
Tel: (418) 878-3040
Fax: (418) 878-3001
www.osburn-mfg.com
This manual is available for free download on the manufacturer’s web site. It is a copyrighted
document. Re-sale is strictly prohibited. The manufacturer may update this manual from time
to time and cannot be responsible for problems, injuries, or damages arising out of the use of
information contained in any manual obtained from unauthorized sources.

Table of Contents

Questions and Answers

  • K
    Karla LopezJul 26, 2025
    What to do if wood burns poorly in my Osburn Indoor Fireplace?
    • T
      thomasrandallJul 26, 2025
      If the wood in your Osburn Indoor Fireplace burns poorly, is slow to start, or produces no heat, several factors could be responsible. A low draw might be the cause, suggesting an upgrade to the chimney. Using wet or decayed wood can also lead to these issues, so ensure you're using proper fuel. Additionally, a blocked intake air supply could be the problem. Check the intake air supply by removing the fan from the insert and opening a window.
  • S
    schmittangelAug 4, 2025
    Why is there smoke in the room from my Osburn Indoor Fireplace?
    • D
      dmooreAug 4, 2025
      If you're experiencing smoke in the room with your Osburn Indoor Fireplace, several factors could be the cause. It might be due to a down draft, in which case upgrading the chimney is recommended. A blocked chimney could also be the culprit, suggesting a need for cleaning. Ensure the chimney damper is open, or consider removing it. Check that the baffle is correctly positioned. Finally, if new paint is curing, refer to the instructions for specific guidance.
  • A
    ashlee42Aug 15, 2025
    Why does wood burn too fast in my Osburn Indoor Fireplace?
    • A
      Adriana MccoyAug 16, 2025
      If the wood in your Osburn Indoor Fireplace burns too fast, it may be due to too much draft in the chimney. In this case, contact a qualified technician for assistance.

Summary

Installation

1.1 General Installation

Basic requirements for stove installation, including ventilation and connection types.

1.2 Clearances to combustibles and floor protector

Specifies minimum distances from the stove and chimney pipe to combustible materials.

1.5 Chimney System

Covers chimney system components, definitions, and general installation requirements for safe venting.

Operation

2.1 Safety Information

Essential safety precautions for operating the wood stove to prevent hazards.

2.2 Fuel

2.4 Lighting A Fire

2.5 Maintaining The Fire

Maintenance

3.3 Chimney Cleaning

3.4 Baffle Installation and Brick Notes

Troubleshooting

Smoke in room

Identifies causes and corrective actions for smoke entering the room during operation.

Wood burns poorly or is slow to start or no heat

Wood burns too fast

Osburn 2400 Specifications

General IconGeneral
BrandOsburn
Model2400
CategoryWood stove
LanguageEnglish

Related product manuals