OSD Audio AP850 - User Manual

and value in everything we make. To ensure you get the most out of your new patio speakers, please take a moment to read this manual before you get started.
Installing Speakers
These weather resistant patio speakers are manufactured to resist
a variety of weather condition. The most ideal place to install these
speakers is the undersides of most eaves and overhangs as they
provide the best protection.
Like all speakers, they sound the best when placed no more than
seven feet apart from each other, and slightly higher than ear level.
If the speakers are more than seven feet apart, toe them in toward
the center of the listening area.
These speakers are not waterproof and cannot be submerged under
water.
Placing Speakers
If your application requires the speaker to be mounted, please
follow these directions. Using the hardware supplied, mount the
plastic knobs supplied. Never mount a speaker on a wall made
of unreinforced drywall or plasterboard. If you are unsure,
consult a professional contractor. (See Diagram 1)
The binding post speaker terminals on the speakers will accommodate
power setting through the knob switch. When connecting the speakers,
it is very important to observe the correct polarity. This means that the
wire attached to the (+), red, or positive terminals on one component
must be attached to the (+), red, or positive terminal on the
corresponding component speaker output terminals. Similarly, the (-),
Black, Negative or ground terminals must connect to the respective (-),
Black, Negative, or ground terminals. This is easy to do by locating the
color stripes that appears on most wire.
Painting the grilles
The metal grilles may also be painted. Use very thin paint (5:1). It will
plugging up the holes with excess paint.
Mounting
To install the bracket on the speaker. Screw the bracket knobs into the
cabinet. Point the speaker toward the listening area. Once the direction
of the speaker has been determined tighten the bracket knobs securely.
(See Diagram 2)
Diagram 1
Screw
Bracket
Diagram 2
First remove the grille fom the speaker using spray paint lightly go
over the front of the grille and then go over the back of the grille.
Two coats may be nessesary for desired look.
Knob
Knob
x
x
Patio Speaker Installation Manual

Summary

Installing Speakers

Placing Speakers

Guidance on mounting speakers, advising to mount the bracket first and attach speakers using supplied knobs. Avoid unreinforced drywall.

Painting the Grilles

Instructions for painting speaker grilles using thin paint (5:1 ratio) to avoid clogging holes, with tips for removal and application.

Mounting Speakers

Steps to install the bracket onto the speaker cabinet and securely tighten the knobs after determining the speaker's direction.

WIRING

Speaker Wiring Polarity

Connect speaker cable to terminals, matching polarity (+ to +, - to -) for correct performance and to prevent channel cancellation.

70 Volts Consideration

Explanation of the 70V transformer for daisy-chaining multiple speakers or setting to 8 ohms for non-70V applications.

Warranty & Repair

Warranty Exclusions

Lists items not covered by warranty, including abuse, accident, misuse, negligence, improper operation, alterations, or defaced serial numbers.

Specifications

OSD Audio AP850 Specifications

General

Brand	OSD Audio
Model	AP850
Category	Speakers
Language	English