OSD Audio SRT4 GEN2 - Connect to AVR;Amplifier or Subwoofer; Adding a Powered Subwoofer to a Zone

CONNECTION
Connect to AVR/Amplier or Subwoofer
Adding a Powered Subwoofer to a Zone.
ConnecttheLINEOutoutputtotheinputonyouramplierorAVreceiverusingtheappropriatecable.The
SRT4 Gen2 supports both analog output (RCA) and digital output (Optical & Coaxial)
Connect a zone LINE OUT output to your LINE IN input of your Active Powered Subwoofer. Use the sub’s
lineouttoconnecttotheamplier.
Amplier/AVReveiver
SRT4 Gen2
AUDIO
IN
R L
COAXIAL
IN
OPTICAL
IN
———— AUDIO ———— ———— AUDIO ————
Active Sub / Sub Amp
Active Sub W/
Built-InAmplier
OUT
Amplier
SRT4 Gen2
IN
R L
R L
AUDIO
IN
R L
———— AUDIO ————