Oslo Silver 2.0 User Manual

OSLO® SILVER 2.0 OPERATING INSTRUCTIONS
THANK YOU for buying the Oslo Silver 2.0 Twin Chronograph and
Countdown Timer. Your purchase brings you a reliable, World-Class Timer with
separate modes for Lap and Split Timing and a Full Function Countdown Timer.
Your Twin Chronograph and Countdown Timer was developed to provide
a multi-mode chronograph with Two Finish Time Memory Recall, plus a
Countdown Timer which shows time remaining and signals completion of the
countdown. In order to ensure that you receive the maximum enjoyment from
your Twin Chronograph and Countdown Timer, BEFORE USING, PLEASE
TAKE A MOMENT TO REVIEW THIS OPERATION GUIDE TO FULLY
UNDERSTAND HOW YOUR TIMER WORKS.
FEATURES
• Event, Lap or Split Timing
•
1/100 second Precision to 10 hours
• Two Finish Time Memory Recall
• An unlimited number of time readings can be taken
• Countdown Timer shows Time Remaining; Counts up at completion
• Audible Alarm at Completion of Countdown
• Countdown Timer range from 1 second to 10 hours
• Extra Large Display, Long life LR44 battery included
• One year factory warranty
IMPORTANT NOTE:
Please select the timing function you wish to use by pressing button B. Then,
proceed as described in these instructions.
Pressing button B will continue to change modes even while the timer is running
(active).
Do not change modes while timing or the timer may not record your desired
results.
For example: Should you wish to record lap times, do not mode into SPLIT to
take time readings.
Display Mode
Function keys
A: SPLIT/RESET
B: MODE
C: START/STOP
M
O D E A
B
C

Oslo Silver 2.0 Specifications

General

Brand	Oslo
Model	Silver 2.0
Category	Watch
Language	English

Summary

Oslo Silver 2.0 Operating Instructions

Key Features Overview

Lists key capabilities of the timer, including split timing, memory recall, and countdown functions.

Display Mode and Function Keys

Explains the display layout and identifies the functions of buttons A, B, and C.

How to Use the Stopwatch

Single Event Measurement

Details the button sequence C>C>A for starting, stopping, and resetting a single stopwatch event.

Split Time Measurement

Explains the C>A>A>C>A sequence for split timing with continuous counting.

Consecutive Split Time Measurement

Outlines the C>A>C>A>A sequence for recording multiple split times.

Single Event Lap Measurement

Details the C>C>A button sequence for single event lap timing.

Lap Time Measurement

Explains the C>A>A>C>A sequence for lap timing with continuous counting.

Consecutive Lap Time Measurement

Outlines the C>A>C>A>A sequence for recording multiple lap times.

Countdown Timer Operation

Setting the Countdown Time

Guides users through setting hours, minutes, and seconds using buttons A and C.

Using the Countdown Timer

Explains how to start, stop, and reset the countdown timer.

Limited Warranty and Care

Warranty Policy

Outlines the one-year limited warranty, coverage, and exclusions.

Care and Maintenance

Provides recommendations for battery replacement, lens care, and moisture avoidance.